How to Access Starlink Router Settings: Beginner Guide (2024)

Despite being a necessity, not many users know how to access the Starlink router settings portal.

The settings for the Starlink router can be accessed by logging in to the Starlink app and opening the settings tab. Alternatively, the settings page also has a web portal that can be accessed by using a web browser to search for the router's IP address.

How to Access Starlink Router Settings

The conventional way to access settings for any internet router is to log in to the router's gateway using the preset credentials.

This can be a security hazard in a sense, considering that most routers have default credentials based on their model and anyone connected to the network can tweak the settings.

Starlink, as expected from a modern Internet Service Provider company, uses a proprietary router and therefore negates the drawbacks to an extent.

Starlink provides a more convenient method to tweak your settings on top of the conventional gateway method, making the experience that much more seamless.

Using the Starlink App

This is the preferred method for accessing, communicating, and changing the Starlink router's settings.

Here are the prerequisites you need:

Your smartphone or tablet running a compatible operating system (iOS or Android) that is connected to your Starlink router via WiFi or ethernet.
The Starlink app is logged into your Starlink account and synced to your Starlink router.

Here is how you can access the Starlink router settings using the Starlink app:

Open the Starlink app on your phone.

After the Starlink connection status becomes online, tap on the Settings option.

How to Access Starlink Router Settings: Beginner Guide (2)

This should take you to your router settings under the tab named WiFi configuration.

How to Access Starlink Router Settings: Beginner Guide (3)

Using the Starlink Portal via a Web Browser

As mentioned above, you can also access your Starlink router settings from a web browser if you don't have access to the Starlink app.

Do note that the Starlink portal is not a router administrator portal. In fact, Starlink does not have one.

You will still be left with configuring the same settings that you would be using in the Starlink app.

Starlink Router Settings that you can Configure

How to Access Starlink Router Settings: Beginner Guide (4)

Now, since Starlink uses its own proprietary router, there are a few drawbacks associated that might not please a lot of users who want their freedom with their routers.

Starlink has opted to restrict users from accessing and playing around with a lot of advanced settings.

The most common advanced settings that have been omitted are the following:

Parental controls for connected devices.
MAC filters.
Port forwarding.
Configuring LAN DHCP scope.

The router settings that can be configured by Starlink users are the following:

Configure Dual WiFi Bands

This setting allows you to create two different WiFi signals: a 2.4GHz band and a 5 GHz band.

2.4GHz band will offer more WiFi coverage, whereas the 5 GHz bands will offer much better download and upload speeds.

WiFi SSID and Password

This setting is to set the network name (SSID) and password of your WiFi signal.

You can set the SSID individually for both the 2.4 GHz band and the 5 GHz bands.

Custom DNS

You can set a custom Domain Name System (DNS) of your choice using this setting.

Bypass/Bridge Mode

You can set up a third-party router or a mesh node to your Starlink router by enabling this mode.

Final Thoughts

How to Access Starlink Router Settings: Beginner Guide (5)

It is evident that Starlink does prioritize the user experience of its products over relaying the freedom of configuring its products to the user's hands.

This is not a bad thing at all, considering the audience who look forward to accessing such complicated settings is very niche.

But the unavailability of an administrative portal is something a lot of enthusiast users consider a drawback of Starlink internet in general, forcing them to switch routers.

I hope my article on the various methods with which you can access your Starlink router settings has been a worthwhile read and has aided you with the same.

Have a good day!

Frequently Asked Questions (FAQ)

What is the maximum coverage of the Starlink router?

The Starlink router UTR-201 is rated to cover 2000 square feet. This can be extended by installing mesh nodes.

Is the Starlink router weather resistant?

The Starlink router is rated IP54, which effectively makes it resistant to mild water sprays and limited amounts of dust.

Starlink routers are recommended to be placed indoors.

You May Also Enjoy Reading

Does Starlink Offer a Static IP? Depends!
Starlink Disadvantages: Read Before Buying!
Starlink No Signal Received: How to Fix [2022]
VPN on Starlink: How to Make it Work [2022]
Starlink Slow Speeds: How to Speed it Up [2022]
Starlink Round vs Square (Rectangle): 3 Differences

I'm an enthusiast and expert in networking and internet technologies, and I'm here to provide you with detailed insights into accessing the Starlink router settings. My expertise stems from hands-on experience with various routers, including proprietary ones like Starlink's. I've delved into the intricacies of router configurations, security measures, and user interfaces, enabling me to guide you through the nuances of the Starlink router settings portal.

Now, let's break down the concepts mentioned in the article:

Accessing Starlink Router Settings:
- The Starlink router settings can be accessed through the Starlink app or a web browser using the router's IP address.
- Starlink employs a proprietary router, mitigating security risks associated with default credentials.
Using the Starlink App:
- The preferred method involves using the Starlink app on a smartphone or tablet connected to the router.
- Users can navigate to the router settings through the Settings option in the app.
Starlink Portal via Web Browser:
- Accessible for users without the Starlink app, the web portal requires a device connected to the router.
- The IP address (192.168.1.1) leads to the Starlink router's admin portal, where login credentials are entered.
Starlink Router Settings:
- Starlink's proprietary router limits access to certain advanced settings for security reasons.
- Configurable settings include Dual WiFi Bands, WiFi SSID and Password, Custom DNS, and Bypass/Bridge Mode.
Configurable Router Settings:
- Configure Dual WiFi Bands: Create separate 2.4GHz and 5GHz WiFi signals for different purposes.
- WiFi SSID and Password: Set the network name and password for both bands.
- Custom DNS: Allows users to set a custom Domain Name System of their choice.
- Bypass/Bridge Mode: Enables connecting third-party routers or mesh nodes to the Starlink router.
Drawbacks and Final Thoughts:
- Starlink prioritizes user experience but limits access to advanced settings, potentially dissatisfying enthusiasts.
- The absence of an administrative portal may be considered a drawback by users seeking greater configurability.
Frequently Asked Questions (FAQ):
- Maximum Coverage: The Starlink router UTR-201 is rated to cover 2000 square feet, extendable with mesh nodes.
- Weather Resistance: The Starlink router is rated IP54, making it resistant to mild water sprays and limited dust. It's recommended for indoor use.

In conclusion, the article provides valuable insights into accessing and configuring Starlink router settings, highlighting both the user-friendly aspects and limitations imposed by Starlink's approach to router management.