CLR Calcium, Lime and Rust Remover | CLR Brands) (2024)

In a well-ventilated area, mix equal amounts of CLR Calcium, Lime and Rust Remover and warm water. Test on a hidden area before applying to the entire surface. Apply directly to the stain with a brush, cloth or sponge. After 2 minutes rinse promptly with cold water. Never leave CLR Calcium, Lime and Rust Remover on an area for longer than two minutes. If the stain does not disappear, repeat this process and add more CLR Calcium, Lime and Rust Remover solution as necessary. Never mix CLR Calcium, Lime and Rust Remover with other household cleaners or bleach.Always read the manufacturer's directions of the item you will be cleaning to make sure that this product is compatible. Consumer discretion is always advised.

Mix one part (ex: 1 cup) CLR Calcium, Lime and Rust Remover to eight parts (ex: 8 cups) water (for 10-12 cup automatic drip coffee makers). Run through coffee maker as if making coffee. Dispose of solution once product has run completely through the maker, then fill entire pot with clear, cold water and run a complete cycle twice. Instructions are for a regular 8-12 cup coffee maker. *Do not use CLR Calcium, Lime and Rust Remover in coffee makers that hold water permanently. *CLR Calcium, Lime and Rust Remover is not recommended for Gevalia, Keurig or Cuisinart coffee makers. *Do not use CLR Calcium, Lime and Rust Remover in espresso machines.Always read your coffee maker’s manufacturer’s directions before using CLR Calcium, Lime and Rust to make sure product is compatible. Certain coffee makers contain permanent carbon/charcoal filters. Consumer discretion is always advised.

Pour enough CLR Calcium, Lime and Rust Remover to cover bottom. Swish around in pot or pan. Add one cup of warm water, allow mixture to soak for two minutes and thoroughly rinse with cold, clean water. Using a soft scouring pad while our product is sitting on the stains is recommended. Always check with the manufacturer of your coffee pots, pans and tea kettles first for their recommendations of products that are safe and effective on their materials.

To clean a dishwasher,remove dishwashing rinse agent before using CLR Calcium, Lime and Rust Remover. Pour a 1/2 cup of CLR Calcium, Lime and Rust Remover directly into the bottom of an empty dishwasher (no glasses, dishes, or flatware but the racks can stay). Run a normal cycle followed by an extra rinse cycle. Make sure there are no detergents or any other chemicals in the machine while using our product. Washing Machine: Run your empty machine (no clothes) without detergent up to the main wash cycle, which is where the water stops and the cycle is about to agitate. Stop the machine and add one-half cup of CLR Calcium, Lime and Rust Remover directly into the tub of the machine. Finish cycle. Run one additional full cycle (wash and rinse) with water only to rinse machine fully. If your machine is HE (high efficiency) and/or 'Water Saver' we recommend using a 1/4 cup of CLR Calcium, Lime and Rust Remover, instead of the normal 1/2 cup recommended for any other type of washer/dishwasher. For Front Loading Machines: Simply add a 1/2 cup of CLR Calcium, Lime and Rust Remover to the soap dispenser (only 1/4 of a cup for HE machines). After the full cycle has completed, run an additional rinse cycle with just water. Make sure there are no clothes or other chemicals in the machine when using our product.

Use only on metal filters. Dilute equal parts of CLR Calcium, Lime and Rust Remover and warm water into a plastic container. Dip the filter into the solution for about two minutes. Brush to loosen buildup and rinse with cold, clean water. Allow to dry.

CLR Calcium, Lime and Rust Remover can not only remove the finish off of brass, aluminum and copper, but can also pit certain grades of brass, copper and aluminum.

Do not use CLR Calcium, Lime and Rust Remover on any natural stone or marble (including cultured marble), terrazzo, colored grout (any other color than white), any painted, coated, sealed or metallic glazed surfaces, plastics, laminates, Formica, Corian, aluminum, galvanized metals, nickel, oil rubbed bronze, brass, copper, steam irons, leaded crystal, refinished tubs or any damaged or cracked surface. CLR Calcium, Lime and Rust Remover may etch older sinks, tubs and tiles. CLR Calcium, Lime and Rust Remover is corrosive. Avoid contact with wood, clothing, wallpaper and carpeting. Some laminated surfaces (counter tops) are coated with a synthetic surface which may be affected by rust removers; clean spills immediately. Always spot test first on an inconspicuous area.

We do not recommend putting CLR Calcium, Lime and Rust Remover in a spray bottle. CLR Calcium, Lime and Rust Remover is acidic in nature and the solution could "spray back" on your clothes or in your eyes or can get on materials it's not intended to be used on.

When cleaning a showerhead, we recommend using a 50/50 solution (equal parts) of CLR Calcium, Lime and Rust Remover and warm water. If possible, remove the showerhead and submerge it in the solution for no longer than 2 minutes (using an old toothbrush on the face of the showerhead after it has soaked will assist in removing the mineral buildup) then rinse promptly and thoroughly with cold water. Repeat at full strength if necessary, rinsing thoroughly after each application.

To clean hard water stains, we recommend using a 50/50 solution (equal parts of CLR Calcium, Lime and Rust Remover and warm water) into a glass or porcelain bowl. Apply solution to the affected stained areas of the glasses using a damp cloth or sponge. After 2 minutes, rinse thoroughly with cold, clean water. If it seems that CLR Calcium, Lime and Rust Remover helped a bit but the glasses are not completely clear, repeat at full strength if necessary. Due to the natural density and hardness of calcium as a mineral, the calcium can actually etch and embed itself into the material of the glass (usually present by having a cloudy appearance vs. spotty).

If it seems that the CLR Calcium, Lime and Rust Remover did not help at all, the glasses may be etched and there is no remedy to remove the cloudiness from the glasses. The cloudiness is actually tiny cuts made in the glass by deposits in the water. The only thing that may remove the etching is a jeweler’s polish.

It is not recommended that CLR Calcium, Lime and Rust Remover be used in steam irons. The acids in our products are not compatible with the components of steam irons, steamers or steam machines. We recommend contacting the manufacturer of your particular steam iron, steamer or steam machine for their recommendation for products safe and effective on their materials.

We do not recommended using CLR Calcium, Lime and Rust Remover on a car. The acids in our product should not be used on aluminum or any painted/coated surface. You can safely remove rust from car wheels (if rims are made of chrome or stainless steel only, no alloys).

CLR Calcium, Lime and Rust Remover should not be used in or on a car radiator. CLR Calcium, Lime and Rust Remover may not be compatible with the materials associated with a radiator and it could have adverse effects if the CLR Calcium, Lime and Rust Remover is not rinsed out completely.

We do not recommend using CLR Calcium, Lime and Rust Remover to clean ice makers. The acids in our product are not compatible with the components of ice makers. We always recommend referring to the manufacture's recommendation for safe and effective products to use on their materials.

We do not recommend using our CLR Calcium, Lime and Rust Remover to remove oil. If CLR Calcium, Lime and Rust Remover is mixed with oil, it will darken the concrete, which is very difficult to remove. To remove oil from concrete or blacktop, we do recommend using our product CLR® Grease-Free.

Yes, CLR Calcium, Lime and Rust Remover is septic safe. By the time it reaches the septic system it is neutralized with water.

We do not recommend using CLR Calcium, Lime and Rust Remover on or in any materials associated with a swimming pool. CLR Calcium, Lime and Rust Remover should never come into contact with chlorine (or any other household chemical). It can create a poisonous gas and is not safe. We recommend consulting with a pool maintenance expert for recommendations for products that would be safe and effective.

Unfortunately, we do not recommend using CLR Calcium, Lime and Rust Remover on pool tile. It could remove the finish from the tile. In addition, if CLR Calcium, Lime and Rust Remover comes in contact with chlorine, it could result in toxic fumes. We recommend consulting with a pool maintenance expert for their recommendation for products that are safe and effective.

We do not recommend using CLR Calcium, Lime and Rust Remover on any natural stones, especially marble (even synthetic). The acids in our product will remove the seal, penetrating the marble and can compromise the natural beauty of marble. Even synthetic marbles are coated and real marble dust is used to give the effect of real marble. If you spill CLR Calcium, Lime and Rust Remover accidentally on these surfaces, make sure to call a marble professional for further instructions.

We do not recommend using CLR Calcium, Lime and Rust Remover on galvanized metals. When a metal is galvanized, a Zinc coating is put over the metal (usually to protect it from rusting). The acids in CLR Calcium, Lime and Rust Remover will remove the Zinc which could compromise the material.

We do not recommend using CLR Calcium, Lime and Rust Remover on cast iron. The acids in CLR Calcium, Lime and Rust Remover can compromise the metal.

We recommend using or disposing of CLR Calcium, Lime and Rust Remover within 3 years. Make sure cap is securely fastened after each use.

We do not recommend using CLR Calcium, Lime and Rust Remover on any natural stones, including granite. The chemicals in the CLR Calcium, Lime and Rust Remover can remove the seal and penetrate the stone.

Jelmar DOES NOT RECOMMEND the use of CLR Calcium, Lime and Rust Remover in or on any water heaters (tank or tankless); however there is a website that does. Again, JELMAR DOES NOT RECOMMEND THE USE OF CLR IN A WATER HEATER. The chemical make-up of CLR Calcium, Lime and Rust Remover is not compatible with the materials or components of a water heater and cannot be thoroughly flushed through the water heater after 2 minutes. We recommend using what the manufacturer of the water heater deems safe and effective.

Yes, CLR Calcium, Lime and Rust Remover is found to be safe on fiberglass. Always spot test first in an inconspicuous area. Begin with a mixture of CLR Calcium, Lime and Rust Remover and water and progress to full strength if needed.

No, CLR Calcium, Lime and Rust Remover should never be used on clothing. Please find an appropriate stain remover or laundry detergent. If CLR Calcium, Lime and Rust Remover is spilled on fabric, you must rinse immediately. It may break down the fibers in clothing and/or fabric.

CLR Calcium, Lime and Rust Remover should not be used to clean rugs or carpeting. CLR Calcium, Lime and Rust Remover can break down the fibers in rugs and carpeting and pull the color out.

Yes, CLR is great for cleaning pet bowls from food, grime and water deposits! Dilute equal parts warm water and CLR to clean ceramic, stainless steel or plastic bowls. Leave on for 2 minutes using a sponge or scouring pad to assist in removal of stains, then rinse thoroughly with cold water. While our product is non-toxic we recommend washing the bowls prior to putting food or water back in them.

Our CLR Calcium, Lime and Rust Remover is non-toxic and water soluble. The chemicals in the product are derived from vegetables, however we recommend all safety precautions be followed, per the back label of the bottle.