Clean Your Shower Screen | CLR Calcium Lime & Rust Remover (2024)

FAQs

What dissolves calcium lime and rust? ›

Calcium Lime Rust, more commonly known as CLR, is a household cleaning product used for dissolving stains, such as calcium, lime, and iron oxide deposits.

The slightly acidic nature of vinegar allows it to soak into and loosen the mineral deposits. Let the vinegar sit for 30 to 60 minutes. Spray the paper towels occasionally with vinegar from a spray bottle to make sure the glass stays wet during this time.

Before reaching for harsh cleaning chemicals, use white vinegar. This tried-and-tested household product is the best way to clean a shower screen and is highly effective at removing limescale. Always use distilled white vinegar as malt or cider vinegar won't clean as thoroughly and may stain surfaces.

If your shower screen is looking cloudy, you may have a hard water problem with calcium and limescale build-up. CLR Bathroom and Kitchen is designed to dissolve and remove calcium and limescale build-up as well as lift soap scum in shower areas.

You can easily spray your sink's rust stains with any weak, household acid — vinegar being the most common and most recommended. Let the vinegar sit for a few minutes but make sure to scrub it clean before it drys. Repeat the process until the stain is completely gone.

White vinegar is a natural solution that can be utilized to dissolve calcium buildup. Sitting overnight, you will be able to remove lime buildup from the drain while avoiding the harsh chemicals in traditional drain cleaners. Avoid putting any store-bought chemicals down the drain.

Quick mix limescale blitz

You can either buy a pre-made vinegar solution or just as easily make your own. Get an old spray bottle and mix up a solution with half water, half vinegar and spray on to your shower screen.

For a tried and true cleaner to tackle hard water stains, we recommend Bio-Clean Hard Water Stain Remover as our best overall pick. It's easy to use, efficient, and it smells pleasant, too. For a more affordable option but still effective pick, check out our best budget pick CLR Multi-Use Calcium, Lime & Rust Remover.

“For really tough stains, I break out the Magic Eraser,” shares Chi Ip, owner of Tidy Here Cleaning Service Boston. Just wipe the eraser firmly across the glass with a steady and firm swipe.

Use a vinegar solution

Vinegar is an excellent, readily available ingredient that most of us probably have lying around in our kitchen cabinets. It is a highly effective and non-toxic way to remove limescale from glass in the shower. White vinegar normally works best when you are using it for cleaning.

What is the strongest limescale remover? ›

HG limescale remover concentrate is the ideal strong limescale remover for removing stubborn limescale.

White vinegar has good descaling properties. It is also easy to use; you just need to spread it undiluted onto your surface using a soft sponge, leave it for a few minutes, then rinse well. For even more descaling power, start by heating up the white vinegar in a pot. Then, apply it using a sponge or soft cloth.

We recommend you to use spirits, natural oils, white vinegar, baking soda and toothpaste above glass cleaning products.

All you have to do is wet the screen with warm water first and give it a quick wipe over with a clean cloth, then spray the white vinegar on and give it a scrub with the same cloth, or a non scratch scourer if the dirt is quite built up. Rinse with warm water and you're done!

CLR PRO Industrial Calcium, Lime & Rust Remover - Quickly Removes Calcium, Lime, Hard Water Deposits and Surface Rust Stains, 32 Ounce Spray (Pack of 6)

CLR Calcium, Lime and Rust Remover.

Two of the most effective substances are lemon juice and ordinary vinegar. Lemon juice is usually the best (and will also leave a lovely smell behind). Stronger pickling vinegar and lime juice are both even more acidic and can be used for really stubborn deposits.