hidesignheidi@gmail.com2022-07-27T14:00:02-04:00May 18, 2022|Uncategorized|
The Issue
We are sometimes asked to do a less than a level 5 skim coat by customers who want nice walls but are looking for some economy. In this article we will show there really is no such thing as a Level 3 or Level 4 skim coat or skimcoating. The finish “levels” specified on architectural drawings and specifications come from USG (US Gypsum) corporation’s finish standards. Everything less than a Level 5 finish is not really a skim coat at all and even a “by the book” Level 5 finish is not what most customers and architects in the New York market have come to expect when specifying skim coat. Let’s see why…..
Definitions
First let’s take a look at a summary of the 5 levels of finish in the USG specification. The full specification can be found in the usg handbook if you are interested in more detail.
Level 0 For temporary construction – no taping
Level 1 Used above ceilings and other concealed areas, one coat of compound on paper tape. Fasteners not covered, corner beads not required. Sometimes called fire taping but does not meet all fire ratings so caution is called for when using this level.
Level 2 Tape is applied as in Level 1 plus corners and fasteners are covered. Typical for garages and warehouses. The picture below is Level 2
Level 3 The same as level 2 plus another layer of compound. This finish is suitable for heavy textured finishes after priming.
Level 4 A standard 3 coat tape job for painted surfaces that are not to be coated with gloss, semi-loss or enamel or where shinny wall covering will not be used.
Level 5 is a level 4 tape job with one thin coat of compound spread over the surface to minimize texture and even out the surface for shinier finishes. This is the “skim coat” in the specification.
Limitations
Now that the “by-the-book” definitions are out of the way, you can see that if you need to:
Level out a bad taping or framing
Flatten pre-war plaster walls that are not really flat for a high gloss finish or to match newly installed moldings
or Blend new walls into old.
More than a Level 5 skim coat is called for and not less, in fact a “by-the-book” Level 5 skimcoat is about the least skimcoating you can specify and may cause you some anxiety later if what you bought was not your intention.
Solutions
To deal with these conditions or at least know what you are getting from the various proposals you may receive and why they may be priced differently, you may wish to read our previous blog post on the subject: Skimcoating: Getting What You Expect From Your Contractor.
Full-service painting companies such as PNP Craftsmen operate as a single point of contact, minimizing scheduling complications and bringing projects in on time and budget. If you have a construction or redecorating project, such as a level 5 skim coat job, contact us and we will help you accomplish your desired product!
