Weather science: How to make a cloud in a jar (2 different methods!) (2024)

This post may contain affiliate ads at no cost to you. See my disclosures for more information.

Don’t you just love looking at clouds in the sky? I sure do!

But how do they get there?

A cloud is formed when water vapor condensesinto water droplets that attach to particles (of dust, pollen, smoke, etc.) in the air. When billions of these water droplets join together, they form a cloud.

As part of our weather unit, we read severalbooks about clouds. Then we decided to get into some hands-on science by making our own clouds in a jar. There are several methods for making a cloud in a jar. In this post I share two methods we tried and I explain how they work.

You’ll find more resources for learning about weatheron Weather Unit Study page my Weather Activities Pinterest board.

Weather science: How to make a cloud in a jar (2 different methods!) (1)

We tried two methods for making a cloud in a jar. Both methodsinvolve making water vapor and then providing some sort of particle for the water vapor to condense on. In the first method, we used hairspray as the particle source and in the second method we used smoke from a match as the particle source.

The hairspray method formed a denser cloud that was easily visible and quite impressive to view. The match method was super cool because of how quickly the cloud formed and then disappeared as the air pressure in the jar changed.

How to make a cloud in a jar using hairspray

For this method, you will need the following materials:

  • A jar with lid
  • About 1/3 cup hot water
  • Ice
  • Hairspray (which I forgot to include in the picture below)
Weather science: How to make a cloud in a jar (2 different methods!) (2)

Start by pouring the hot water into the jar. Swirl it around a bit to warm up the sides of the jar.

Weather science: How to make a cloud in a jar (2 different methods!) (3)

Turn the lid upside down and place it on the top of the jar.Place several ice cubes onto the lid, and allow it to rest on the top of the jar for about 20 seconds.

Weather science: How to make a cloud in a jar (2 different methods!) (4)

Remove the lid, quickly spray a bit of hairspray into the jar, and then replace the lid with the ice still on top.Watch the cloud form.

Weather science: How to make a cloud in a jar (2 different methods!) (5)

When you see a good amount of condensation form, remove the lid and watch the “cloud” escape into the air.

Weather science: How to make a cloud in a jar (2 different methods!) (6)

How does it work?

When you add the warm water to the jar, some of it turns to water vapor. The water vapor rises to the top of the jar where it comes into contact with cold air, thanks to the ice cubes on top. Water vapor condenses whenit cools down. However, a cloud can only form if the water vapor has something to condense on to. In nature, water vapor may condense onto dust particles, air pollution, pollen, volcanic ash, etc. In the case of thisactivity, the water vapor condensed onto the hairspray.

How to make a cloud in a jar using a match

For this method, you will need the following materials:

  • A jar
  • A match
  • A balloon with the bottom cut off (so you can get the balloon over the mouth of the jar)
  • Warm water
  • A flashlight
Weather science: How to make a cloud in a jar (2 different methods!) (7)

Pour enough warm water into your jar to cover the bottom 1/2″ of the jar.

Light amatch, then hold the lit end in the jar for a few seconds to allow smoke to enter the jar. Then remove the match (or you can simply drop it into the jar – the flame will extinguish when the match hits the water).

Quickly cover the opening of the jar with the cut balloon.

Weather science: How to make a cloud in a jar (2 different methods!) (8)

With this next step, the goal is to change the air pressure in the jar by gently pushing and releasingthe balloon. Be gentle as you do this to ensure that the balloon does not come off the top of the jar.

With your finger, gently push the balloon into the jar a little bit to increase the air pressure in the jar. Then release. As you release, you should notice a cloud instantly form inside the jar. You may want to shinea flashlight at the jar to help you see the cloud more clearly.

You can repeating the pushing and releasing several times and you will see additional clouds form.

Weather science: How to make a cloud in a jar (2 different methods!) (9)

How does it work?

When you add the warm water to the jar, some of it turns to water vapor. When you press on the balloon, you increase the air pressure in the jar, which results in warmer air. When you then release the balloon, you decrease the air pressure in the jar, which results in cooler air. As the air cools, the water vapor in the jar condenses. The condensed water vapor is able to collect on the smoke particles from the match, and thus you see a cloud form.

More weather resources

More weather posts from Gift of Curiosity:

  • Books about the weather
  • Weather 3-part cards
  • Water cycle demonstration
  • Cloud classification activities
  • Cloud classification craft
  • Make it rain in a jar
  • Wind resistance experiment
  • How do hurricanes form?
  • Make a hurricane
  • Printable weather Bingo game
  • Printable weather Bingo game
Weather science: How to make a cloud in a jar (2 different methods!) (2024)
Top Articles
Latest Posts
Article information

Author: Ray Christiansen

Last Updated:

Views: 6589

Rating: 4.9 / 5 (49 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Ray Christiansen

Birthday: 1998-05-04

Address: Apt. 814 34339 Sauer Islands, Hirtheville, GA 02446-8771

Phone: +337636892828

Job: Lead Hospitality Designer

Hobby: Urban exploration, Tai chi, Lockpicking, Fashion, Gunsmithing, Pottery, Geocaching

Introduction: My name is Ray Christiansen, I am a fair, good, cute, gentle, vast, glamorous, excited person who loves writing and wants to share my knowledge and understanding with you.