JoeR - 7/31/2018 12:36
Like mentioned, maintenance is key. I have near 6k hours on an L180 (I bought it used). Replaced radiator and muffler so far, pins are a little sloppy and needs a face plate and bushings now, but runs great (yet...). Came from a dairy, but I believe it was taken care of in it's previous life.
Not to hijack the thread, but we bought a L170 last year used with 750 hours on it, (same frame as L180?) and have really liked it so far- have over 1000 hours on it now. I hear some folks say that the NH engines they used were prone to a short life on occasion, have you had to do any engine work to yours?
Any other work in general?
Is yours fully manual or does it have pilot controls?
Would like to keep this one around as long as possible.
FAQs
A smaller, more compact skid steer with a 40-hp engine might need an overhaul at 4,000 hours. On average, many machine operators will say you'll get 5,000 hours out of a skid steer before you encounter mechanical issues, but this comes down to a number of factors.
How many hours are skid steer tracks good for? ›
On average, rubber tracks last between 400 to 2,000 operating hours. However, this range can be influenced by several factors, which we will explore in detail.
How many hours is a lot for a used skid steer? ›
I've found that on average anything above 2,000 hours, in a skid steer, is pushing high hours. There will be exceptions to this rule, I've seen nice skid steers with 3,500 hours on them and I've seen junk skid swith 1,200 hours on them. I'd say 2,000-2,500 hours is typically a worn out skid steer.
How many hours is low on a skid steer? ›
Consider Age, Hours, and Usage
If a 2-year old skid steer has 1,500 hours on it, it hasn't been worked full-time. necessary. As a rule of thumb, an 80 hp machine won't require an engine overhaul until its passed 8,000 hours; a 40 hp machine, on the other hand, will likely require an overhaul after about 4,000 hours.
What is considered high hours on a loader? ›
Operating conditions will determine how long a crawler loader will last, but general contractors are often looking at about 6,000-7,000 hours for the average track loader lifespan before requiring a rebuild. Rebuilds for the engine and hydraulic system might be necessary at about 10,000-12,000 hours.
How many hours will a compact track loader last? ›
Skid steers, along with compact track loaders, typically have an average working life spanning 6,000 to 12,000 hours.
How many hours do bobcat tracks last? ›
Based on production quality, rubber compact loader tracks will last between 1200 to 1600 cumulative work hours. Tracks made of steel usually last at least two and half times longer than their rubber counterparts.
How do I know if my skid steer tracks are bad? ›
4 signs that your tracks are on their last legs
- Constant loss of tension. It is normal for tracks to stretch and lose tension over time. ...
- Cracked tracks. Also be wary of cracks in the rubber during the daily inspection of tracks. ...
- Slipping tracks. ...
- Visible metal links.
A well maintained Kubota tractor should last between 4500-5500 gauged hours. As many tractor owners report using their tractor for only 100-200 hours a year, this can translate into years of use. If you have the time and skill to optimally tend to and care for a Kubota tractor, you have a chance to exceed 10,000 hours.
How much can you make a year with a skid steer? ›
Skid Steer Loader Salary
| Annual Salary | Monthly Pay |
|---|
| Top Earners | $44,000 | $3,666 |
| 75th Percentile | $39,000 | $3,250 |
| Average | $36,404 | $3,033 |
| 25th Percentile | $32,000 | $2,666 |
you can easly get $60.00-$80.00 per hr. The way we normally charge for skid steer work is $250.00/day for the equipment/fuel, plus $45/hr for the operator. For a 10hr work day this would give you a total cost of $700.00 (which would work out to $70/hr).
Are skid steers worth the money? ›
If you're looking for a fast-moving machine, a skid steer is likely the best choice. Skid steers are lightweight and lack slow-moving tracks, allowing them to move much faster than track loaders on flat surfaces. They are also better designed to perform sharp turns and maneuver through crowded worksites in less time.
How fast is a 2 speed skid steer? ›
In response to customers' needs for faster travel speed across jobsites, John Deere is introducing a two-speed option to its mid-frame 318D and 320D skid steer loader models. The new option increases ground speed by as much as 62 percent on both manual and E/H controls machines, from 6.8 mph to 11 mph.
What is considered low flow skid steer? ›
Low-flow skid steers, which are also known as standard-flow skid steers, range between 18 and 25 gallons per minute (gpm). High-flow skids move hydraulic fluid at rates between 30 and 45 gpm.
How long does it take to clear land with a skid steer? ›
If your property is brush, bramble, briars, and small saplings on flat ground, you could do 3 acres in 8 hours pretty easily. Wow! Imagine clearing that much land in such a short amount of time. That's the advantage of using a Skid Steer!
What is a lot of hours on a cat skid steer? ›
SKID STEERS
The life expectancy of a Cat skid steer can be upwards of 5,000 hours with the right level of care.
What is considered high flow hydraulics on a skid steer? ›
High-flow and standard-flow terminology refers to how much hydraulic fluid can move through the hoses on the machine. This rate is commonly called gallons-per-minute (gpm). Standard-flow skid steers have between 17 to 25 gpm while high-flow skid steers have hydraulic flow rates anywhere from 30 to 45 gpm.
What is high hours on a tractor? ›
A high-hour tractor might have 4,000 hours on it but if it is well-maintained, it could last you for another 6,000 or more hours. Will you have to do repairs? Probably but, it may still be a good value to you, especially if you are not using the tractor for a lot of hours each year.
