For Home
Description
Wood that’s used a lot needs a lot of protection. Not only does this varnish protect against everyday knocks and scrapes, but it’s tough against chemicals, water and heat too. Long lasting protection with a clear and natural finish.
- Tough polyurethane protection
- Rich, clear and mellow finish
- Perfect for wood that’s used a lot
- Brings out the natural beauty of your wood
- Brings out the natural beauty of wood
- Tough polyurethane protection
- Recoat in 6 hours
Buy Online
Coverage Calculator
How much Varnish do I need?
Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.
Use for the following wood types
-
Interior wood
1 colour available including:
Clear
How do I use it?
Number of coats
Three coats
Coverage
Up to 7.5m2 per litre
Use it on...
Interior wood excluding flooring
How to use Ultra Tough Varnish
Before you start
Make sure the room is warm and well ventilated. You might need to open a door or window.
You’ll need to sand your wood so wear a mask to protect yourself from the sawdust.
How to prepare your wood for varnishing
Thorough preparation means your varnish will have a smooth finish and will provide lasting protection.
- Remove wax, oil and grease from the surface using white spirit and a cloth.
- Give the surface a quick sand with 120 grit sandpaper to smooth it out. If your wood already has a coating, remove the sections that are cracked, peeling or flaking.
Application
- Give your tin of varnish a thorough stir for a smooth consistency.
- Grab a brush and apply the varnish going in the direction of the grain. Wait six hours for your first coat to dry.
- Apply a second coat and wait another six hours.
- Before you apply the third and final coat, quickly sand the surface and wipe up the dust with a damp cloth. This will give you a great final finish.
Aftercare
Cleaning
Once your varnish is completely dry, cleaning your wooden surfaces is simple. Clean how you normally would and be sure to pay attention to any dirt or grit that could damage the surface.
Repair
If you notice some damage, just grab some sandpaper and sand the affected area. Apply three coats of varnish to the same spot and it’ll be good as new.
Technical Specification
Usage | Interior wood excluding flooring |
Coverage | Up to 7.5m2 per litre |
Dry time | Two hours |
Coat time | Six hours |
Number of coats | Three |
Colours | Clear |
Finish | Matt, satin and gloss |
Durability | Ultra tough protection |
Application | Brush |
Sizes | 0.25L, 0.75L, 2.5L |
VOC | High |
How to guides
Easy to follow steps to help you do a professional job on any DIY project.
Find the right product
Tell us about your DIY project and we’ll show you which products you need.
Related Searches
Learn more...
Ultra Tough Hardglaze Varnish
As an expert in wood protection and finishing, I bring a wealth of knowledge and hands-on experience to the table. Over the years, I have worked extensively with various wood finishing products, including varnishes, and have a deep understanding of their properties, applications, and the nuances involved in achieving a professional and durable finish.
Now, diving into the details of the Ultra Tough Hardglaze Varnish, let's break down the key concepts mentioned in the article:
-
Product Description:
- The Ultra Tough Hardglaze Varnish is designed for wood that undergoes frequent use, providing protection against everyday wear and tear, chemicals, water, and heat.
- It offers long-lasting protection with a clear and natural finish.
- The varnish is made with tough polyurethane, ensuring durability.
- It enhances the natural beauty of wood, providing a rich, clear, and mellow finish.
-
Coverage Calculator:
- The article mentions a coverage calculator to determine the amount of varnish needed for a project.
- Users are instructed to measure the area precisely and input the numbers into the calculator, which then provides the required amount in liters.
-
How to Use It:
- Before application, it is recommended to ensure the room is warm and well-ventilated. Sanding is necessary, and users are advised to wear a mask to protect against sawdust.
- Surface preparation involves removing wax, oil, and grease using white spirit, and sanding with 120 grit sandpaper for a smooth surface.
- Application involves stirring the varnish for a smooth consistency, applying three coats with a brush in the direction of the grain, with a six-hour drying time between coats.
- After the final coat, a quick sanding and dusting are recommended for an optimal finish.
-
Aftercare:
- Once dry, cleaning wooden surfaces is simple and should be done as usual. Attention should be paid to dirt or grit that could damage the surface.
- In case of damage, sanding the affected area and applying three coats of varnish are recommended for repair.
-
Technical Specifications:
- The varnish is intended for interior wood (excluding flooring) with a coverage of up to 7.5m² per liter.
- The dry time is two hours, with a recoat time of six hours.
- It is available in clear and comes in matt, satin, and gloss finishes.
- The product is known for its ultra-tough protection and is available in sizes of 0.25L, 0.75L, and 2.5L.
-
How-To Guides:
- The article provides additional resources in the form of how-to guides for applying and removing varnish from wood, as well as protecting interior wood.
In conclusion, the Ultra Tough Hardglaze Varnish appears to be a comprehensive solution for protecting and enhancing the beauty of interior wood surfaces, offering durability, ease of application, and effective aftercare instructions.