Types of Concrete Anchors and How to Use Them (2024)

4

by Gregory Mills

I have a deep dark confession to make: I love anchoring things to concrete. It’s a weird addiction. I started doing it in college. There are so many types of concrete anchors to choose from, but I completely skipped small plastic anchors and went straight for the heavy stuff. 1/2-inch or larger lead shields bolting multi-ton outdoor sculptures to concrete pads. Soon after, I switched to sleeve anchors. I finally moved to wedge anchors. Red Heads for those of you in the know. I’m not proud of it. I have tried to break the habit but after 35 years of doing it. I can’t stop. It is just too much fun—provided you do it the right way.


If you use concrete anchors the wrong way, you will have an incredibly frustrating experience. It could cause you to do great bodily harm to your power tools (possibly wanting to throw them in the nearest lake while uttering many profane words). Each anchor is installed using its own unique method, and each one has its own quirks. This can lead to frustration if you don’t know which one to use in which situation. Hopefully, this article will sort out any confusion.

Table of Contents

  • Types of Concrete Anchors
  • Installation Tools for Various Types of Concrete Anchors
  • Summarizing the Types of Concrete Anchors and How to Use Them

Types of Concrete Anchors

You can find dozens of types of concrete anchors on the average construction site. I use several regularly.

The strongest anchoring systems utilize resin-based anchors you install with two-part epoxy. These appear most commonly on industrial and commercial sites and are too expensive or specialized for day-to-day use unless specified by an architect or engineer.

Some anchors feature bolt heads that snap off at a predetermined torque level. They leave the threaded bolt and flange to indicate the exact torque was used to tighten the anchors. These are also extremely expensive and relegated to projects where extremely tight tolerances and absolute safety is a must. Think long-span bridges or nuclear power plants.

Those of us who don’t work for companies that pay $600 for a toilet seat typically use the types of concrete anchors shown here:

Types of Concrete Anchors and How to Use Them (1)

Wedge Anchors and Sleeve Anchors

Both wedge anchors and sleeve anchors are excellent types of concrete anchors that hold a tremendous amount of weight. They provide strength for both pullout and shear force. Because of the spitting/wedging force they put on the concrete, try to avoid getting closer than 3-inches to the edge of the concrete. If you do, you risk splitting off a chunk of the slab. Of the two, wedge anchors provide the most strength—and are my personal favorite of all the anchors to use.

Types of Concrete Anchors and How to Use Them (2)
Types of Concrete Anchors and How to Use Them (3)

How to Install Wedge and Sleeve Concrete Anchors – Drilling

You install both wedge and sleeve anchors the same way. Drill the proper size hole with a hammer drill or rotary hammer drill and insert the anchor. Drive it in with a hammer. More on that below. The hole diameter is listed on the packaging and usually on the anchor itself. You will have to drill the hole at least a 1/4-inch deeper than the anchor.

Types of Concrete Anchors and How to Use Them (4)

I recently wrote an article on how to drill through concrete. Also, if you are not familiar with the differences between a rotary hammer vs a hammer drill you might want to read that article as well. Both of these are necessary tools for concrete work.

Types of Concrete Anchors and How to Use Them (5)

Driving in the Anchor

Once the hole is drilled and the anchor is inserted as far as it will go, drive the anchor in the rest of the way with a hammer or small sledgehammer, depending on the size anchor you are using. Be very careful here. Notice the photos below. There are two types of concrete wedge and sleeve anchors. High-quality premium brands have extra metal at the top of the bolt so you don’t deform the screw threads when hammering it in. If you use the cheap anchors, back off the nut so you will not be hammering on the end of the bolt. You want to be hammering on the nut instead and it will protect the threads (see the photo on the far right). Don’t use excessive force regardless.

Types of Concrete Anchors and How to Use Them (6)
Types of Concrete Anchors and How to Use Them (7)
Types of Concrete Anchors and How to Use Them (8)
Types of Concrete Anchors and How to Use Them (9)

You cannot remove wedge or sleeve anchors. Instead, you need to cut them off using a grinder or reciprocating saw. For the City of Lakeland’s Florida Outdoor Sculpture Competition, we replace the sculptures every year with new ones. Each sculpture bolts down to a concrete pad using wedge anchors. Rather than cut them off, we actually drill all the way through the 6-inch thick concrete pads to install the new sculptures.

Set the Concrete Anchor and Tighten the Nuts

The next year, after removing the outgoing sculpture, we simply hit the protruding anchor with a hammer driving it flush with the surface of the concrete. The pad is instantly ready for us to install the new sculpture. Drilling all the way through the pad lets water drain through. Otherwise, water in the holes can freeze and expand, causing the pads to crack.

Types of Concrete Anchors and How to Use Them (10)

Once done installing the concrete anchors, tighten the nuts. While you can use a socket set or ratcheting open-end wrench to get in tight spaces. To save more time, especially when installing anchors with larger 3/4-inch or 1 1/8-inch bolt heads, invest in a cordless impact wrench. This really speeds up the process of tightening concrete anchors. If you don’t know the difference between an impact driver vs an impact wrench, check out a video we made on the subject.

Large Diameter Concrete Anchors

Large diameter concrete anchors, including Tapcon brand Heavy-Duty Anchors, have several big advantages over other types of concrete anchors. In particular, they can be removed, though not reused. Once removed though, you will not be able to reuse the hole. I have reused Tapcon concrete screws in noncritical, indoor workloads provided it goes in a freshly-drilled hole.

Types of Concrete Anchors and How to Use Them (11)

Another advantage of large-diameter concrete anchors is they can get closer to the edge of the concrete than a wedge anchor since they don’t expand.

Tapcon claims their large diameter concrete anchors are 20% stronger than wedge or sleeve anchors. They certainly install very quickly. You will not be able to install them with hand tools (perhaps the Incredible Hulk could). Use an impact wrench to install these large concrete anchors after drilling the appropriate size hole.

Lag Shields (Lead Shields) and Plastic Anchors

Lag shields (often called lead shields) and plastic anchors both work in the same manner. You drill the correct size hole, insert the anchor, and then drive in the screw. This expands the metal or plastic, wedging it in place. Use these for your lightest-duty anchoring. This goes double for plastic anchors—which we don’t recommend for concrete where you need higher pull-out strength. Plastic concrete anchors work for lightweight objects—perhaps 30 to 50 lbs depending on the size of the anchors.

Types of Concrete Anchors and How to Use Them (12)
Types of Concrete Anchors and How to Use Them (13)

Lead shields, while useful, have diminished in popularity due to the convenience of wedge and sleeve anchors. The latter provide a much stronger hold and most find them quicker to install and use. Lead shields do have one unique trick, however. You are supposed to use lag bolts with lead shields. You can, however, also use screw eyes (screw eyebolts) which have the same threads as lags. Lead shields are the only type of concrete anchor that allows this. Use a construction screwdriver to turn the screw eyes when it gets really tight.

At the Polk Museum of Art, we have lead shields permanently placed in our brick sculpture courtyard. In the event of a hurricane heading our way, we can install large eye screws in the ground, then lash down the sculptures to ready them for the storm.

Tapcon Concrete Screws

It is no exaggeration to say that Tapcons have changed the world. The first art gallery I worked in had brick walls and it was my job to hang the exhibits every month or two. It was such a huge pain drilling holes and installing plastic anchors. I would have killed for Tapcons back then, especially with an installation kit like the ones pictured below. Plastic anchors certainly didn’t do anything for the look of the walls after we removed the exhibit and all you saw were little colored circles on the wall.


Types of Concrete Anchors and How to Use Them (14)

Powder Actuated Fasteners

Powder actuated fasteners are sometimes called Ramsets, which is a name brand. They are unique among anchors in that they do not require drilling a hole first. Instead, they use a .22 caliber low-velocity gunpowder charge to drive specially hardened nails through wood or metal into concrete. While fast, they can rupture the concrete around the nail, shifting the board you were trying to attach to it. My personal preference is to use them in cinder block walls and use wedge anchors in concrete.

Types of Concrete Anchors and How to Use Them (15)
Types of Concrete Anchors and How to Use Them (16)
Types of Concrete Anchors and How to Use Them (17)

Toggle Bolts – The Often Overlooked Type of Concrete Anchor

Speaking of cinder blocks, one of the most used anchors for cinder blocks is toggle bolts. They take advantage of the hollow cavity in the cinder blocks. Squeeze the anchor’s wings together folding them up into the smallest possible dimension. Drill a hole just big enough for the wings to pass through. Next, pass the wings through the hole into the hollow cavity where they will spring open. Pull back on the bolt so the wings grab and then tighten the bolt. Toggle bolts are very strong anchors. In the photo below, I replaced the bolt that comes with it with an eye bolt so I could tie a rope to the anchor.

Types of Concrete Anchors and How to Use Them (18)
Types of Concrete Anchors and How to Use Them (19)
Types of Concrete Anchors and How to Use Them (20)

Basic Concrete Anchor Kit – Ideal for Tapcons up to 5/16-inch Anchors

  • Cordless hammer drill
  • Masonry bits
  • Tapcon bit or Tapcon installation kit
  • Small bulb or another method to blow or vacuum out the hole
  • Hammer
  • Adjustable wrench
  • PPE (hearing protection, eye protection, and a dust mask)
Types of Concrete Anchors and How to Use Them (21)

Mid-level Concrete Anchor Kit – Ideal for Tapcons up to 1/2-inch Anchors

  • Cordless rotary hammer
  • Masonry bits
  • SDS Plus Tapcon bits and installation kit
  • Dust blower
  • Hammer
  • Construction screwdriver
  • Socket set or ratcheting combination wrenches
  • PPE (hearing protection, eye protection, and a dust mask)
Types of Concrete Anchors and How to Use Them (22)

Pro Concrete Anchor Installation Kit – Ideal for Tapcons up to 3/4-inch Anchors

  • Rotary hammer drill with built-in HEPA dust extraction
  • SDS Plus bits
  • SDS Plus Tapcon bits and installation kit (not shown)
  • HEPA dust extractor (not pictured)
  • 3 or 4 lbs engineering hammer
  • Construction screwdriver
  • Impact wrench with impact sockets and construction socket handle
  • Leaf blower to clean the surface after installation if needed
  • PPE (hearing protection, eye protection, and a dust mask)
Types of Concrete Anchors and How to Use Them (23)

PPE – Personal Protective Equipment

Eyes and ears. That used to be every foreman’s mantra when he saw the OSHA inspector coming. “Eyes and ears, boys!” meant everyone needed to put on their eye and hearing protection. Now, it’s eyes, ears, and lung protection. This is especially true when working with concrete which contains silica, a known carcinogenic. To put it in plain English: concrete dust can cause cancer.

We have several articles on the topic:

  • OSHA Table 1 Compliance
  • How to Buy a Dust Extractor
  • Silica Dust Permissible Exposure Limit
Types of Concrete Anchors and How to Use Them (24)
Types of Concrete Anchors and How to Use Them (25)

Summarizing the Types of Concrete Anchors and How to Use Them

I have shown you many types of concrete anchors. There are actually many more than this, including hammer drive anchors, adhesive anchors, and epoxy anchors. You’ll find the ones in this article on most residential jobsites. Larger commercial or industrial sites might introduce the others. I have used every one of these for various reasons over the years, and each has its place. With the proper tools, all types of concrete anchors are fairly easy to install. Have fun drilling! I know I will.

Types of Concrete Anchors and How to Use Them (26)

Want more? Join our newsletter and get the latest tool reviews every week!

Types of Concrete Anchors and How to Use Them (27)

And...we'll even send you our "Best Tools for Your Hard-earned Dollars" white paper!

Types of Concrete Anchors and How to Use Them (2024)

FAQs

What type of concrete anchor should I use? ›

Anchor Types Overview

Masonry and concrete anchor types are considered light-duty, medium-duty or heavy-duty, based on how much weight they can support. Light-duty anchors are good for wall hangings that weigh up to 50 pounds. Medium-duty anchors are good for wall hangings that weigh up to 200 pounds.

What type of concrete anchors are the strongest? ›

Wedge concrete anchors are a common choice for heavier load applications since they're one of the strongest types of concrete anchor bolts. They're also corrosion-resistant and are simple to work with. Best used for: Concrete wedge anchors are best used for heavier loads and heavy shear applications.

How far apart should concrete anchors be placed? ›

A rule-of-thumb in the concrete-fastener industry is that the minimum spacing should be 10 diameters from each anchor, and measured center to center. The spacing from an unsupported edge should be at least five-anchor diameters. Wedge anchors provide the widest range of concrete fasteners, from 1/4 to 1-1/4-in.

Are longer concrete anchors better? ›

Many times wedge anchors are purchased in longer lengths to allow for deeper installation into the concrete, since the deeper the embedment into the concrete then the stronger the holding power will be.

Which is better wedge anchor or sleeve anchor? ›

The wedge anchor, drop-in anchor and concrete strike anchor can only be used in solid concrete and have the highest & most consistent holding values in concrete. Concrete sleeve anchors can be used in concrete, brick or block but their holding values are less in terms of shear and pullout values.

What are the weakest types of anchors? ›

Mushroom-Style Anchor: This anchor gets its holding power by sinking into bottom sediment. It should not be used to anchor boats larger than a small canoe, rowboat, small sailboat, or inflatable boat, as the holding power is weak. You should never depend on a mushroom anchor to hold your boat in rough water or weather.

How thick should a concrete anchor be? ›

Minimum Embedment Depths by Diameter
Wedge Anchor DiameterMinimum Embedment
5/8 in.2 3/4 in.
3/4 in.3 1/4 in.
7/8 in.3 7/8 in.
1 in.4 1/2 in.
3 more rows
May 21, 2021

What type of anchor has the best holding power? ›

Which Style or Category of Anchor?
  • Plow and Scoop anchors—the “single point” style represented by the Manson Supreme, Rocna, CQR, Delta and Claw—have the best all-around holding ability in varying bottom conditions. ...
  • Claw anchors are also a great choice as they set easily and perform well in most conditions.

How do I know what anchor to use? ›

Anchor manufacturer guidance, usually based on boat length, can be a good starting point to determine which size anchor is appropriate for your boat. If your boat is heavier than typical boats of that length, or presents more windage, you should select a larger anchor.

How do I know what weight anchor I need? ›

Holding power is formulated based on environmental factors, like wind speed. As a general rule, a holding power of 90 pounds is sufficient for safely anchoring a 20' boat in winds up to 20 mph. For the same wind speed a holding power of 125 pounds is adequate for a 25' boat.

How much weight can a 3 8 concrete anchor hold? ›

Nominal Anchor Diameter d in.Minimum Embedment Depth hnom in. (mm)Minimum Concrete Compressive Strength
1/41-1/8 (28)1,320 (5.9)
1-3/4 (44)2,775 (12.4)
3/81-5/8 (41)2,240 (10.9)
2-3/8 (60)3,485 (15.5)
20 more rows
Feb 9, 2023

How deep should a hole be for a concrete anchor? ›

The hole should be drilled 1/4" to 1/2" deeper into the base material than the anchor will penetrate. This allows for any material to fall when the anchor is inserted into the hole. After the hole is drilled, it must be cleaned of all debris, material or dust.

How long after pouring concrete can I drill anchors? ›

Before drilling and installing a wedge anchor, the concrete must have had a minimum of 28 days to set properly. Therefore, do not install a wedge anchor into green concrete (the term describing concrete that is less than 28 days old).

How close together can concrete anchors be? ›

The cone-shaped area is a picture of the holding values of the anchor. Placing anchors closer than 10 anchor diameters apart will allow the two anchors' holding values to overlap and decrease the holding values of both anchors.

Do I need special anchors for concrete? ›

Some heavy-duty plastic anchors, such as the Red Head Polyset, can be driven into a hole in concrete. From there, you use the included pan head sheet metal screw to fasten whatever you need.

Are Tapcons better than wedge anchors? ›

RE: Tapcon anchors Vs Wedge Anchors

Yes, Tapcons are easier to install...they are also easier to screw up so that you get a false sense of confidence in their pullout resistance. For direct shear, either is fine. For tension, the capacity depends greatly on the skill of the installer.

Should I use plastic anchors in concrete? ›

Remember that plastic anchor screws work well in concrete and even in cabinets, but they'll max out pretty quickly depending on screw size and the anchor itself. Common applications of plastic screw anchors include: Light-load situations where the force will typically be straight down.

Top Articles
Latest Posts
Article information

Author: Lilliana Bartoletti

Last Updated:

Views: 6133

Rating: 4.2 / 5 (53 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Lilliana Bartoletti

Birthday: 1999-11-18

Address: 58866 Tricia Spurs, North Melvinberg, HI 91346-3774

Phone: +50616620367928

Job: Real-Estate Liaison

Hobby: Graffiti, Astronomy, Handball, Magic, Origami, Fashion, Foreign language learning

Introduction: My name is Lilliana Bartoletti, I am a adventurous, pleasant, shiny, beautiful, handsome, zealous, tasty person who loves writing and wants to share my knowledge and understanding with you.