CrystaLac Extreme Protection Polyurethane is an interior NON-YELLOWING, Environmentally Safe Top Coat that is Super Hard, Super Clear and Super Easy to Use. It is Scratch, Chemical, and Water Resistant. It Self-Levels, has Low Odor, Low V.O.C. and cleans up easily with water.
Use anywhere an extra level of protection is needed. Tough enough for Bar-tops, floors and more. Added UV stabilizers will keep dyes and stains brilliant and will help protect colors from fading. Dries crystal clear even over white finishes. Excellent for use as a chalk paint sealer.
CrystaLac Polyurethane can be applied by either brushing or spraying (gravity feed or HVLP sprayer) see website for detailed spraying instructions. Use a good quality brush.
Prior to Top Coating, we recommend using CrystaLac Amber Toned Sanding Sealer to enrich the warm natural colors in the wood and minimize grain raising.
It is not necessary to sand between each Top Coat. All CrystaLac Top Coats will bond to the prior coat. CrystaLac Top Coats can be used over thoroughly dried oil or water-based stains, shellac, lacquer, Polyurethane or Acrylic. If recoating over an old finish, scuff sand first and remove any surface contaminants such as dirt, waxes or polishes.
Usually 3 to 5 coats are sufficient to produce a beautiful, protective finish. Use more if desired.
Coverage is approximately 400 to 500 sq. ft. per gallon.
Dry time is usually 30 min to 1 hour. Allow 2 to 4 hours before recoating.
Do Not use stearated sandpaper or tack cloths. Do Not freeze. Do Not apply below 60 degrees.
Do Not thin or clean with lacquer solvents or mineral spirits. Use soap and water for clean-up.
Warranty: Test to your satisfaction on scrap material before using. The manufacturer, The CrystaLac Company, will only replace defective product. Under no circ*mstances will the manufacturer or distributors be responsible for the cost of application labor, refinishing expenses, or any costs more than the purchase price of the container.
Caution: Keep out of reach of children! Do not ingest. Avoid contact with skin and eyes. Do not breathe vapors. Use with adequate ventilation. When spraying or sanding, use an OSHA approved mask. V.O.C. is less than 1.4 Lbs. per gallon.
Disposal: Consult your local sanitation department. Do not dump on the ground.
For more information about CrystaLac products, visit www.crystalac.info
As a seasoned expert in coatings and finishes, I have extensive knowledge of various products designed to provide exceptional protection and aesthetic appeal to surfaces. My expertise spans a wide range of applications, from woodworking to interior finishes. In this context, I'd like to shed light on the CrystaLac Extreme Protection Polyurethane—a product that stands out for its remarkable features and versatile applications.
CrystaLac Extreme Protection Polyurethane Overview:
-
Non-Yellowing Formula: The CrystaLac Extreme Protection Polyurethane is specifically formulated to maintain clarity and prevent yellowing over time. This feature is crucial for preserving the natural appearance of surfaces and protecting against the common issue of yellowing in many finishes.
-
Environmentally Safe: A key highlight of this top coat is its commitment to environmental safety. The formulation boasts low Volatile Organic Compounds (V.O.C.) levels, ensuring minimal impact on indoor air quality. This makes it a suitable choice for environmentally conscious users.
-
Superior Hardness and Clarity: The product is known for its exceptional hardness, providing a durable protective layer against scratches and wear. Additionally, it offers superb clarity, ensuring that the coated surface remains clear and transparent.
-
Scratch, Chemical, and Water Resistance: The CrystaLac Polyurethane excels in providing comprehensive protection. Its resistance to scratches, chemicals, and water makes it suitable for a wide range of applications, including high-traffic areas like bar-tops and floors.
-
Self-Leveling and Low Odor: The self-leveling property simplifies the application process, resulting in a smooth and even finish. The low odor enhances user comfort during application, contributing to a more pleasant working environment.
-
UV Stabilizers: The added UV stabilizers in the formulation play a crucial role in preserving the vibrancy of dyes and stains. This feature is particularly beneficial in preventing color fading over time, ensuring long-lasting aesthetics.
-
Versatile Application: The CrystaLac Polyurethane offers flexibility in application methods. Whether applied by brushing or spraying (using gravity feed or HVLP sprayer), the product accommodates various user preferences. Detailed spraying instructions can be found on the official website.
-
Compatible with Various Surfaces: This top coat is designed to bond effectively with various substrates, including oil or water-based stains, shellac, lacquer, polyurethane, or acrylic. This versatility allows users to apply the product over a wide range of finishes.
-
Amber Toned Sanding Sealer: For optimal results, the manufacturer recommends using the CrystaLac Amber Toned Sanding Sealer before top coating. This enhances the warm natural colors in wood and minimizes grain raising.
-
Application Guidelines: The product eliminates the need for sanding between each top coat, promoting efficiency. Typically, 3 to 5 coats are sufficient for a beautiful and protective finish, with a coverage of approximately 400 to 500 sq. ft. per gallon.
-
Drying Time and Recoating: The CrystaLac Polyurethane boasts a quick dry time of 30 minutes to 1 hour, allowing for efficient application. Recoating can be done after 2 to 4 hours. It is advised not to use stearated sandpaper or tack cloths, and the product should not be applied below 60 degrees.
-
Clean-Up and Disposal: Clean-up is easy with soap and water, eliminating the need for harsh solvents. The product's low V.O.C. content (less than 1.4 lbs. per gallon) aligns with safety standards. Disposal guidelines recommend consulting local sanitation departments and discourage dumping on the ground.
-
Cautionary Measures: The product comes with standard cautionary instructions, advising users to keep it out of reach of children, avoid ingestion, prevent contact with skin and eyes, and use adequate ventilation during application.
-
Warranty and Liability: The manufacturer, The CrystaLac Company, emphasizes testing the product on scrap material before use. The warranty covers the replacement of defective products, with a clear disclaimer that the manufacturer or distributors will not be responsible for labor, refinishing expenses, or costs exceeding the purchase price.
-
Product Information: For more in-depth information about CrystaLac products, users are encouraged to visit the official website at www.crystalac.info.
In conclusion, the CrystaLac Extreme Protection Polyurethane is a comprehensive and versatile solution for those seeking a top coat that combines durability, clarity, and environmental responsibility. Its features, from non-yellowing and UV stabilization to ease of application and compatibility with various finishes, position it as a reliable choice for achieving a beautiful and long-lasting protective finish.
