Medical communities around the globe are more preoccupied than ever with disinfecting equipment. COVID-19 is changing the conversation about how we clean, not only in medical facilities but also at home and throughout our communities. With stainless steel being the preferred material by the medical community, it is imperative that we understand how to properly sanitize stainless steel equipment. Lakeside manufactures a wide variety of stainless steel medical carts, shelves and accessories and we’ve put together a guide on how to accomplish this.
Selecting a Disinfectant
According to a study from the National Institute of Health, the virus that causes COVID-19 was detectable on up to three days on stainless steel products. Therefore, verifying that the correct product is being used to disinfect surfaces is paramount. The Environment Protection Agency created a list of disinfectants that are effective against COVID-19.
While bleach should generally be avoided for cleaning stainless steel products, common products such as Lysol Spray or Lysol Wipes can be used on stainless steel. If you decide to use a product of this type, it is extremely important that you rinse the surface thoroughly with fresh water. Lysol and similar products can be abrasive to stainless steel if the substance is on the surface of the stainless steel for an extended period.
Using the Right Tools
Prior to cleaning and disinfecting any surface, it is imperative to use Personal Protective Equipment (PPE). There are four major types of PPE including face shields, gloves, goggles, and gowns. At minimum gloves and eye protection should be used before cleaning any potentially contaminated surface.
Certain cleaning utensils like steel wool or other steel brushes are too abrasive for stainless steel. These types of tools can contain iron particles. When used to clean stainless steel, they can leave metal particles on the surface and lead to rust formation. A soft cloth, gentle brushes, or sponges are much better alternatives.
The Cleaning Process
To effectively sanitize a stainless steel surface, it is recommended to begin by using hot soap and water. Using your towel, you can then begin to use any additional cleaning solutions. Always rub in the direction of the steel grain for maximum effectiveness and to avoid scratching the surface.
After all disinfectants are applied, rinse the surface thoroughly with fresh, warm water. Always remember to completely wipe the surface dry. This process should be repeated after every disinfecting operation. As always – and especially during the COVID-19 pandemic – frequent cleaning is strongly recommended.
Lakeside Manufacturing is committed to supporting medical facilities with rapid manufacturing and lead times. Our facility remains open and operational under the essential business provisions granted by local and federal guidelines. Lakeside is prepared to support increased demand of stainless steel products and remains dedicated to providing quality healthcare solutions. For more information about the stainless steel carts we have available, please review our Healthcare Catalog.
As a seasoned expert in the field of healthcare equipment and sanitation, I draw upon a wealth of knowledge acquired through extensive research, practical experience, and a deep understanding of industry standards. My expertise encompasses the nuances of cleaning and disinfecting procedures for medical equipment, with a focus on stainless steel—a material widely preferred by the medical community.
The critical importance of proper sanitation has become even more evident in the context of the global COVID-19 pandemic. The article rightly emphasizes the heightened concern within medical communities worldwide regarding the disinfection of equipment, both within healthcare facilities and in our homes and communities.
The reference to a study from the National Institute of Health underscores the seriousness of the matter, pointing out that the virus causing COVID-19 can persist on stainless steel surfaces for up to three days. This information serves as a foundation for the necessity of selecting the right disinfectant to effectively combat the virus on such surfaces.
The mention of Lakeside Manufacturing, a reputable provider of stainless steel medical carts and accessories, adds credibility to the article. The fact that Lakeside has compiled a guide on sanitizing stainless steel equipment indicates a commitment to promoting best practices in the industry.
The article delves into the crucial aspect of selecting an appropriate disinfectant, citing the Environmental Protection Agency's list of products effective against COVID-19. Caution is advised against using bleach on stainless steel, and instead, commonly available products like Lysol Spray or Lysol Wipes are recommended, with an emphasis on thorough rinsing due to potential abrasiveness.
Highlighting the significance of Personal Protective Equipment (PPE) before engaging in cleaning procedures aligns with established safety protocols. The mention of specific PPE types—face shields, gloves, goggles, and gowns—emphasizes the seriousness of the sanitation process.
The section on using the right tools further showcases practical insights. The warning against abrasive tools like steel wool or steel brushes, which may contain iron particles leading to rust formation, demonstrates a nuanced understanding of the material science involved in maintaining stainless steel surfaces.
The cleaning process details, starting with hot soap and water, followed by additional cleaning solutions, align with standard practices. Emphasizing the importance of wiping surfaces dry and the need for frequent cleaning during the COVID-19 pandemic underscores a proactive and thorough approach to sanitation.
In conclusion, the article not only provides practical guidance on sanitizing stainless steel equipment but also incorporates credible references, industry-specific insights, and a commitment to quality healthcare solutions. This holistic perspective makes it a valuable resource for medical professionals and individuals alike.
